oil valve

英 [ɔɪl vælv] 美 [ɔɪl vælv]

网络  油阀

化学



双语例句

  1. Oil valve stem, protective cap and valve-stem seal.
    用机油润滑气门杆、保护帽和气门杆密封件。
  2. High rates of carbohydrate use reduce combustion of fat. Control and faults analysis on oil pressure proportional valve of hydraulic press
    高比例地消耗醣类会减少脂肪的燃烧。水压机油压比例阀的控制及故障分析
  3. The increased temperature influences greatly on reliability of seal and system when shock absorber is working, the mechanism of heat generation when oil passes damping valve is analyzed.
    针对减振装置工作时温升对密封件及系统可靠性影响较大的问题,分析了油液通过阻尼阀生热的机理。
  4. Residual oil can be drained via valve at the rear of gear reducer and oil drain valve in thrust bearing oil sump.
    残油的排放可由减速机尾部的阀门和推力轴承油池的放油阀门来进行。
  5. Control and faults analysis on oil pressure proportional valve of hydraulic press
    调速器中间油压油(控制油)水压机油压比例阀的控制及故障分析
  6. Hoist cylinder oil relief valve
    起重机油缸油压安全阀
  7. Design of Oil Return Valve Based On SolidWorks
    基于SolidWorks平台的回油阀设计
  8. Cargo loading manifold hoist cylinder oil relief valve
    货油装卸系统分路阀箱起重机油缸油压安全阀
  9. The utility model is composed of a handle, a pull rod, a barrel body, a piston, a bottom plate, an oil inlet valve, an oil outlet valve, etc.
    本实用新型由手柄、拉杆、筒体、活塞、底板、进油阀、出油阀、等部件所构成。
  10. The thesis studies mainly the drive and control technique of aeronautic linear DC step motor ( LDCSM) used in emergency discharging oil valve on airplane.
    本文针对“十五”航空基金项目&新型航空用直线直流电动机驱动控制系统,研究了飞机应急放油阀用航空直线步进电动机的驱动控制技术。
  11. The preheating pan of constant temperature oil is connected by the oil conveying pipe with the vacuum electric frying pan, and the oil conveying pipe is provided with an oil feed valve;
    恒温油预热锅与真空电炸锅通过输油管连接,输油管上有一个输油阀;
  12. Analyzing the energy loss due to oil distributing valve, the equation to calculate the moving distance of distributing valve is derived so as to determine the moving distance of valve core.
    分析了配油阀的能量损失情况,并以配油阀的能量损失最小为目标,推导出计算配油阀运动行程的方程,给出了阀芯运动行程的确定方法。
  13. The old universal hydraulic testing machine of our company is running by the method of manual adjusting inlet and outlet oil valve and it has many defects such as testing method behindhand, intensity labour and imprecision results.
    而我公司旧液压万能试验机以手动调整进、回油阀的方式运行,有试验手段落后,劳动量大和测试结果不准确等多项缺点。
  14. Analysis on the Fracture of Oil Valve Opereating Rods of Santana Automobile
    桑塔纳轿车油门操纵杆断裂分析
  15. This impulsion tool uses a high speed on-off valve to control to-and-fro motion of the distributing oil valve core, which impels the cylinder rod to-and-fro motion to form impulsion.
    此冲击器采用高速开关阀控制配油阀的阀芯往复运动,从而促使活塞杆往复运动形成冲击的工作方案。
  16. Is it smoke oil pump, enter salt card oil valve shut off tight because of there is existence of salt crystallization to present often in actual production, cause the pump valve to seal losing efficiency etc.
    在实际生产中经常出现抽油泵被盐卡死,进油阀由于有盐结晶的存在而关闭不严,造成泵阀密封失效等现象。
  17. This paper summarizes the characteristics, technical process and technical applications of ACM. It mainly states the process and technical applications in oil seal, valve stem seal and Oring of automobile sealing products.
    本文综述了ACM的特性及其在密封制品中的加工和应用技术,重点介绍了汽车密封件中油封、阀杆油封和O型圈的加工和应用技术。
  18. Modeling and simulation on hydraulic system of tanker cargo oil valve
    油船货油阀液压系统的建模与数值仿真
  19. This paper analyses the adaptability of the structure of traditional oil throttle valve to water medium.
    本文分析了油压节流阀阀口结构型式对水介质的适应性,并根据水介质的特性,研制了一种新型的水压节流阀。
  20. In this paper, the application of VR technique based on Web in establishing software of displaying mechanical products is introduced with a circle oil valve as an example, and some key techniques in establishing the software have been discussed.
    本文以回油阀为例介绍了基于网络的VR技术在创建机械产品展示软件中的应用,并讨论了该软件开发中的关键技术。
  21. This paper discusses systematically the structural design features of this clutch, including the design of key parts such as friction plate, return spring and quick draining oil valve, the implementation of cooling and lubrication and the selection of sealing devices.
    为此,系统地论述了该离合器的结构特点并对摩擦片、回位弹簧、快速排油阀等关键部件进行了设计;
  22. Research on Seal Technology for the Spindle Oil Valve of Light Hydrocarbon Storage
    轻烃总库锭子油阀密封技术研究
  23. Analysis of grinding cracks of oil pump valve of diesel engine
    柴油机油泵阀磨削裂纹分析
  24. Daily Care and Maintenance of Gas-oil Valve
    陕北石油秩序气液联动阀的维护与保养
  25. The Adaptability of Several Oil Hydraulic Valve Structures in Water Hydraulics
    几种油压阀的结构型式对水的适应性
  26. Efficiency Analysis of High Pressure Radial Piston Pump with One Oil Distributing Valve
    单配油阀高压径向柱塞泵容积效率分析
  27. Failure Analyzed of Decent Oil Valve
    催化油浆闸板阀失效原因分析
  28. Exhaust Cutoff Oil Valve and Its Application to Full-Enclosed Distribution Transformer
    排气截油阀及其在全密封配电变压器上的应用
  29. The control strategies of the DC-motor-driven clutch, step motor-driven transmission and step motor-driven oil valve were studied.
    对电机驱动离合器、变速器和油门的控制技术进行了研究。
  30. OCV is the oil control valve of VVT engine, which determines when the intake valve open and close. The main purpose of actuator is to change the camshaft phase.
    OCV是可变气门正时发动机上控制发动机的进气门正时的机油控制阀,执行器是改变凸轮轴相位的控制器。